103
Mounting Section 3-3
• Do not install the CP1L in any of the following orientations.
3-3 Mounting
3-3-1 Mounting in a Panel
When mounting the CP1L CPU Unit in a panel, use either surface installation
or DIN Track installation.
Surface Installation Even if a DIN Track is not used, a CP1L CPU Unit and CP/CPM1A-series
Expansion Units or Expansion I/O Units can be mounted using M4 screws.
For restrictions on the number of Expansion Units and Expansion I/O Units
that can be connected, refer to
1-2 System Configuration
.
CP1L CPU Unit
Ex
To Next Page
Loading...
