193
F3SJ-A
User’s Manual
Chapter7 Accessories (Sold Separately)
Appendix
E
Environment-resistant case
Back-mounting bracket for environment-resistant case
Side-mounting bracket for environment-resistant case
Series connection cable for environment-resistant case
Appearance Model name Note
For emitter F39-EJ-L One environment-resistant case is provided in a
set.
Mounting bracket is not included.
You must purchase optional back-mounting
bracket (F39-EJ-R) or side-mounting bracket
(F39-EJ-S).
When environment-resistant case is used,
operating range is from 0.2 to 7m (protective
height of 1649mm or less) and from 0.2 to 5m
(protective height of 1655mm or more).
If protective height of F3SJ is 605mm or more,
only vertical mounting as shown left is available.
A protective structure complies to
IP67(IEC60529).
For receiver F39-EJ-D
Appearance Model name Note
F39-EJ-R 2 brackets per set
Appearance Model name Note
F39-EJ-S 2 brackets per set
Appearance Model name Note
For emitter F39-JJR3WE-L Required for series connection with an
environment-resistant case. Series-connection
cable for 1 set of sensors.
For receiver F39-JJR3WE-D