Omron F3SJ Series - Page 23

3
F3SJ-A
User’s Manual
Chapter1 Basic Configuration and Names
Overview and Specifications
E
Component Model name Description
Extension
cable
Cable with connector on one
end
F39-JCA
(to be discontinued)
F39-JDA
This extension cable is used to connect the F3SJ to a
controller with discrete terminals(G9SA-301-P)or to a safety
processing system (e.g. DeviceNet safety).
p.189
Cable with connectors on both
ends
F39-JCB
(to be discontinued)
F39-JDB
This extension cable is used when the length of the
connection cable is insufficient. The length can be selected.
p.189
Reduced Wiring Connector F39-CN5 This connector is used for a reduced wiring system, in
combination with the following cables for reduced wiring
system.
Cable for reduced wiring
(2 cables per set, for emitter and receiver)
F39-JDBA These cables are used for a reduced wiring system, a set of
connector cables for emitter's ends and receiver's ends.
p.190