Omron MX2 Series User Manual

5 Basic Settings
5 - 14
Multi-function Compact Inverter 3G3MX2-EV2 User’s Manual (I666-E1)
Parameter No.
Function name
Parameter No.
Function name
C057
Overtorque/Undertorque Level
(Reverse Power Running)
P036
Torque Bias Selection
C058
Overtorque/Undertorque Level
(Forward Regeneration)
P037
Torque Bias Value
C059
Overtorque/Undertorque Signal
Operation
P038
Torque Bias Polarity Selection
H001
Auto-tuning Selection
P039
Speed Limit Value in Torque Control
(Forward)
H002/H202
1st/2nd Motor Parameter Selection
P040
Speed Limit Value in Torque Control
(Reverse)
Similarly, in the light load mode, the following function options are not displayed.
Multi-function Input 1 to 7 Selection
Multi-function Output 11 Selection, Multi-
function Output 12 Selection, Multi-function Relay
Output (AL1, AL2) Function
Selection
40: TL
Torque limit enabled
07: OTQ
Overtorque/Undertorque signal
41: TRQ1
Torque limit switching 1
10: TRQ
Torque limit
42: TRQ2
Torque limit switching 2
−
−
52: ATR
Torque reference input permission
−
−

Omron MX2 Series Specifications

General

Cooling Method	Fan cooling
Output Frequency Range	0.1 to 400 Hz
Control Method	V/f control, Sensorless vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheating, short circuit
Communication Options	Modbus RTU
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Ambient Operating Temperature	-10°C to +50°C
Enclosure	IP20
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000m
Power Supply Voltage	200-240V AC
Input Voltage	3-phase 200-240V AC