Why Omron WS02-SIMC1-E - V1.9 REV 02-2009 Software unexecuted Cyclic task cannot be changed to WAIT mode?
If an unexecuted Cyclic task cannot be changed to WAIT mode in Omron Software, it is because you tried to change a Cyclic task in INI to WAIT mode. Try again after executing the program.
How to fix Omron Software Communication error (communications timeout)?
If a communications timeout error occurs in Omron Software, it means a timeout occurred in a response from the Ladder Engine. If the cycle time of the Ladder Engine is too long, use synchronous processing in the virtual cycle time. Check if the target FINS address is the same as that of the Ladder Engine.
Why Omron WS02-SIMC1-E - V1.9 REV 02-2009 Software file format is invalid?
If the Omron Software file format is invalid, the specified execution file has an invalid format. Specify the I/O condition file, which has a different file format from a Data Replay file.
What to do if The data in the clipboard is not the I/O condition format in Omron WS02-SIMC1-E - V1.9 REV 02-2009?
If the data in the clipboard is not the I/O condition format in Omron Software, copy the I/O condition expression of correct format to the clipboard and try again.
Why The lines with invalid I/O condition format have been deleted in Omron WS02-SIMC1-E - V1.9 REV 02-2009?
If the lines with invalid I/O condition format have been deleted in Omron Software, it means there is a wrong format for I/O conditions. Check the I/O conditions settings.
What to do if Omron WS02-SIMC1-E - V1.9 REV 02-2009 Software failed to connect to the PLC?
If Omron Software failed to connect to the PLC and the operation exited, it means it's not possible to communicate with the target PLC. Check the FINS address for the target PLC.
Outlines the manual's purpose and lists essential related documents for operation.
Provides a section-by-section summary of the manual's content.
Defines the target personnel and general safety guidelines for operating the PLC system.
Highlights critical safety warnings and potential hazards specific to CX-Simulator operation.
Provides precautions to observe when using the CX-Simulator in specific application contexts.
Explains the CX-Simulator's function, role in development, and core capabilities.
Details the architecture and components of the CX-Simulator software.
Compares CX-Simulator capabilities with actual PLC operations for effective debugging.
Highlights features that improve program debugging efficiency and user experience.
Lists compatible PLC models, CPU units, and computer requirements for CX-Simulator.
Provides a detailed comparison of CX-Simulator's behavior against actual CS/CJ-series PLCs.
Lists the necessary software prerequisites for installing and operating the CX-Simulator.
Step-by-step guide for installing the CX-Simulator software.
Instructions for removing the CX-Simulator software from the computer.
Explains the methods for starting CX-Simulator and connecting it to CX-Programmer.
Describes the layout and function of the main CX-Simulator windows.
Details how to configure system status, PLC units, UM settings, and clock parameters.
Covers the functions, menus, and operations within the Debug Console for debugging tasks.
Guides users on leveraging CX-Programmer for debugging, highlighting key operational differences.
Explains the various execution modes like Scan Run and Step Run for debugging programs.
Details the process of setting up Step Run, breakpoints, and I/O break conditions for precise debugging.
Covers debugging tasks, including execution time, status monitoring, and individual task execution.
Introduces serial communication capabilities, supported protocols, and hardware.
Provides instructions on setting up serial communication parameters for various units and ports.
Explains methods for connecting to external devices via serial communication.
Demonstrates debugging techniques using message display and serial data files.
Introduces network communication functions, supported protocols, and units.
Guides through setting up network communication parameters for various units.
Explains how to set up network connections and routing tables for FINS communication.
Provides examples for debugging network communications using display messages and local connections.
Explains how to connect the CX-Simulator with other applications for PLC debugging.
Describes connection methods, including coexistence on the same computer and network connections.
Outlines the functions for automating virtual external input creation and data management.
Explains the process of generating, running, and checking results using virtual external inputs.
Details methods like Command Log, Data Trace, Data Replay, and I/O Condition for input generation.
Explains how to run programs using Data Replay Tool, I/O Condition Tool, or a debugging ladder program.
Describes how to verify simulation results using time chart monitoring and Excel graphing.
Describes the fundamental operational flow of the CPU Unit within the CX-Simulator.
Explains cycle time calculation and highlights differences from actual CS/CJ/CP series PLCs.
Details the configuration and usage of I/O memory areas within the CX-Simulator.
Lists common errors encountered during CX-Simulator operation and their solutions.
Provides guidance on resolving connection, network, editing, and cycle time errors.
Introduces the tool for automating the creation of multiple data trace files.
Explains how to set up sampling addresses, files, and options for data trace recording.
To Next Page
General