Oracle Database Appliance X10 User Manual

Callout Indicator/LED: Color State Meaning
1 Locate: white • Off - Normal operation.
• Fast blink - This LED
blinks to help locate the
system. Operators can
turn this indicator on and
off remotely using Oracle
ILOM.
• Pressing this button
toggles the fast blink on or
off.
2 Service Required: amber • Off - Normal operation.
• On - A fault is present in
the server node.
The lighting of this indicator is
always accompanied by a
system console message that
includes a recommended
service action.
3 OK: green Indicates the operational state
of the server node:
• Off - AC power is either
not present or the Oracle
ILOM service processor
(SP) boot process is not
complete.
• Steady blink - Standby
power is on and the
Oracle ILOM SP is
running, but the server
host power is off.
• Slow blink - Startup/
shutdown sequence has
been initiated on the
server host. During
startup, the power-on self
tests are running on the
system. During shutdown,
the server host is shutting
down and transitioning
from full power to standby
power.
• On - The server host is
powered on and is in the
process of booting or is
running the operating
system.
4
Power button Press to apply full power and
start the server host. Press
again to transition from full
power to standby power where
only the Oracle ILOM SP is
running.
Chapter 1
Oracle Database Appliance X10-HA Status Indicators
1-8

Oracle Database Appliance X10 Specifications

General

Brand	Oracle
Model	Database Appliance X10
Category	Storage
Language	English