• Power Down the Server for Immediate Shutdown Using Oracle ILOM CLI
• Power Down the Server for Immediate Shutdown Using Oracle ILOM Web
Interface
• Power Down the Server for Immediate Shutdown Using the On/Standby Button
Power Down the Server Gracefully Using Oracle ILOM CLI
Performing a graceful shutdown ensures that all of your data is saved and the system
is ready for restart.
1. Log in to the server as superuser or equivalent.
Depending on the nature of the problem, you might want to view the system status
or the log files or run diagnostics before you shut down the system. Refer to
Oracle ILOM Documentation.
2. Notify affected users that the server will be powered down.
3. Save any open files, and quit all running applications.
Refer to your application documentation for specific information about these
processes.
4. Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
account.
Refer to Oracle ILOM Documentation.
5. At the Oracle ILOM prompt, shut down the operating system: stop command
-> stop /System
Note:
The stop /System command does not guarantee a system shutdown.
This command is only a request to the host operating system (OS) to
perform a system shutdown. To ensure a system shutdown, see Power
Down the Server for Immediate Shutdown Using Oracle ILOM CLI.
The host server performs an orderly power shutdown to Standby power mode, and
the System OK LED on the front panel begins blinking.
6. Disconnect the power and cables from the server.
See Disconnect Cables From the Server.
Caution:
When you power down the server using Oracle ILOM, the server enters
Standby power mode. Power is still directed to the service processor
remote management subsystem and power supply fans. To completely
power off the server, you must disconnect the power cords from the
power supplies.
Chapter 2
Preparing the Server for Component Replacement
2-8
To Next Page
Loading...
Need help?
General