13. Ensure that the secured cables do not extend above the top or below the bottom of the
server to which they are attached.
Otherwise, the cables might snag on other equipment installed in the rack when the
server is extended from the rack or returned to the rack.
14. If necessary, bundle the cables with additional Velcro straps to ensure that they stay clear
of other equipment.
Note:
If you need to install additional Velcro straps, wrap the straps around the cables
only, not around any of the CMA components. Otherwise, expansion and
contraction of the CMA slide bars might be hindered when the server is
extended from the rack and returned to the rack.
Powering On Oracle Database Appliance
1. If your system includes a storage shelf, perform the following actions:
• If you powered off and disconnected the power cords from a storage shelf (and
storage expansion shelf if one is present), reconnect the power cords now.
The disks begin to initialize and the power supply LEDs light green. This can take
several minutes.
Chapter 6
Powering On Oracle Database Appliance
6-13
To Next Page
Loading...
Need help?
General