range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
95
2) Then insert the NVMe SSD into the M.2 PCIe interface of the development board and
fix it
3) The position of the SPI Flash on the development board is shown in the figure below,
no other settings are required before starting the programming
4) You also need to prepare a good quality USB2.0 male-to-male data cable
5) Then download Rockchip driver DriverAssitant_v5.12.zip and burning tool
RKDevTool_Release_v3.15.zip from Orange Pi's data download page
6) Then download the image of Android11
a. After opening the download link of the Android image, you can see the
To Next Page
Loading...