range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
16
10) After burning the Linux image, balenaEtcher will also verify the image burned into
the TF card by default to ensure that there is no problem in the burning process. As
shown in the figure below, a green progress bar indicates that the image has been burnt,
and balenaEtcher is verifying the burnt image
11) After successful burning, the display interface of balenaEtcher is as shown in the
figure below. If a green indicator icon is displayed, it means that the image burning is
successful. At this time, you can exit balenaEtcher, and then pull out the TF card and
insert it into the TF card slot of the development board for use.
To Next Page
Loading...