range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
59
(rev 01)
6) The balenaEtcher has been pre-installed in the Linux image, and the opening method
is as follows:
If it is not pre-installed, for how to download and install the arm64 version of
balenaEtcher, please refer to the instructions in the section on how to download and
install the arm64 version of balenaEtcher.
7) The interface after balenaEtcher is opened is as follows:
8) The method of using balenaEtcher to burn u-boot to the SPI Flash of the development
board is as follows:
a. First click on Flash from file
To Next Page
Loading...