Four-Channel Digital Video Recorder
23
Set up the time-lapse record for each camera.
• Sched: Schedule the time-lapse mode by time (Refer to Figure 16 Recording Schedule
Setup Dialog.).
• Speed: Set the recording speed (1/30ips~30ips).
• Quality: Set the recording image quality (Very High, High, Standard and Low).
• Keep the continuous pictures: Select On to limit the time-lapse recording period and set
the number of hours for continuous (time-lapse) recording (Refer to the Limit the Time-
Lapse Recording Period in this section for details.).
NOTE: Refer to the Chapter 4.2 Recording for details of using Mode 1 and Mode 2.
Set up Time-Lapse Recording Schedule
0PATH: MENU ▶ Record ▶ Time-Lapse Record Setup0
1. Move to the Sched field(Schedule) of the selected camera, and press
ENTER.
2. The recording schedule is configured from Sunday to Saturday and Holidays at 30-minute
intervals from 0:00 to 24:00.
3. Move to a specific hour of a specific day, and
ENTER to select the record mode:
No Recording (no block), Mode 1 (Blue block), or Mode 2 (Yellow block). Each time
you press
ENTER, the record mode changes. Select Mode 1 for normal record setup.
For details of using Mode 2 refer to the Chapter 4.
4. To select multiple hours within a single day, move to a specific day in the left side and
press
ENTER
to set the same setting to whole hours of that day. To select multiple days
with the same recording hours, move to the specific hour field at the top of the schedule and
press
ENTER to set the same setting to whole days of that hour.
5. Move to the empty block on the top left side, and press ENTER to set all days and hours to
the same setting.
NOTE: The interval of time setting is 30 minutes. Selecting the first blank means
From 00:00:00 to 00:29:59.
To Next Page
Loading...
