– 14 –
Chapter 2 Installation and Connection (To installation personnel) — Installation (To installation personnel)
Installing the Chromakey Software AV‑SFU60
If the activation operation is performed using the key code attached to the Chromakey Software AV-SFU60 (optional), chroma key functions of KEY2,
KEY3, and KEY4 can be added. One package contains a single keyer for ME1 and ME2, so three packages are required when adding chroma key
functions to all keyers.
For details, refer to “Read before use” of the Chromakey Software AV-SFU60 (optional).
@@
NOTE
t This function will be available in V2.00.00 or higher.
To Next Page
Loading...
