Panasonic AV-HS6000 - Plug-In Menu

– 40 –
Chapter 4 Preparations — Basic operations for the multi‑selection panel area
S3 [OP] Moves to the [CHANNEL SELECT] menu.
10 [STOP]
Stops recording Clip for the operation target.
f Operations are impossible for [STILL1] to [STILL4].
12 [REC]
Records the source selected with the VMEM bus in the video memory for the
operation target.
r [CHANNEL SELECT] menu
Select [STILL1] to [STILL4] or [CLIP1] to [CLIP4] in the operation menu of the register memory to display the [CHANNEL SELECT] menu.
S1 ‑ S3 [CHANNEL SELECT] Displays the menu title.
1 ‑ 4 [STILL1] - [STILL4]
Selects the operations target.
Returns to the original menu when selected.
5 ‑ 8 [CLIP1] - [CLIP4]
11 [EXIT] Returns to the original menu.
r [OPERATION SELECT] menu
Select [OP] in the operation menu of the register memory to display the [OPERATION SELECT] menu.
S1 ‑ S3 [OPERATION SELECT] Displays the menu title.
1 [REG SEL] Moves to the operation menu for the register memory.
2 [PLAY]
Moves to the [PLAY] menu.
f Operations are impossible for [STILL1] to [STILL4].
3 [REC] Moves to the [REC] menu.
11 [EXIT] Returns to the original menu.
r [PAGE SELECT] menu
Select [PAGE SEL] in the operation menu of the register memory to display the [PAGE SELECT] menu.
S1 ‑ S3 [PAGE SELECT] Displays the menu title.
1 ‑ 9 [PAGE1] - [PAGE9] Selects the page number of the register memory.
11 [EXIT] Returns to the original menu.
Plug‑in menu
Press the <PLUG IN> button on the multi-selection panel area to display the plug-in menu.
Used as a plug-in software menu.
Content differs depending on plug‑in software specications.