Panasonic AV-HS6000 - Project Management; Saving Data on a Memory Card or Storage Module; Loading Data from a Memory Card or the Storage Module

– 100 –
Chapter 5 Basic Operations — Project management
Project management
The settings of the unit can be saved or loaded in/from three types of storage.
f Memory card (optional) inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2
f Storage Module AV-HS60D1 (optional) which can be mounted inside the Main Frame AV-HS60U1/AV-HS60U2
f Internal storage of the local computer connected to the <LAN> terminal of the Main Frame AV-HS60U1/AV-HS60U2 (This function will be available in
V2.00.00 or higher.)
@@
NOTE
t To use a memory card in the unit, make sure to initialize the memory card using the unit. When the unit initializes the memory card, it formats the
memory card (in compliance with the SD standard) and creates a dedicated directory. (All les saved on the memory card will be erased.)
For details, refer to “Initializing a memory card” (page 103).
Saving data on a memory card or storage module
Save a project le in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the <PRJ> button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Save] in the [SD]/[SSD] column.
f The [Save] screen is displayed.
3
Change the screen display as necessary.
[Sort] Sorts the le icon view in ascending or descending order by le number, le name, or date.
[View] Fixed to icon display.
[Cancel] Closes the [Save] screen.
4
Select the item to be stored.
[Setup]*
1
Current setting data
[Preset]*
2
Memories other than shot memory, event memory, macro memory, and video memory (Still, Clip)
[SMEM]*
1
Register memory of shot memory (Max. 81)
[EMEM]*
2
Register memory of event memory (Max. 81)
[Macro]*
2
Register memory of macro memory (Max. 81)
[Still]*
2
Four channels of current frame memory
[Clip]*
2
Four channels of current frame memory
*1 The setting is xed with [ON] in the version below V2.00.00.
*2 The setting is xed with [OFF] in the version below V2.00.00.
5
Select [OK].
f The project le is saved in a free register memory positioned after the selected le.
f A le name is assigned automatically. To change the le name, use the [Misc] screen after the registration.
f A registered register memory cannot be overwritten. Delete the data on the [Misc] screen before registration.
Loading data from a memory card or the storage module
Load a project le saved in a memory card or the Storage Module AV‑HS60D1 (optional).
1
Select the <PRJ> button → [PROJECT] → [SD/SSD] tab.
2
Select an item in [Load] in the [SD]/[SSD] column.
f The [Load] screen is displayed.
3
Change the screen display as necessary.
[Sort] Sorts the le icon view in ascending or descending order by le number, le name, or date.
[View] Fixed to icon display.
[Cancel] Closes the [Load] screen.
4
Select the item to load.
f Items not saved in the project le are displayed as [Off].
[Setup]*
1
Current setting data
[Preset]*
2
Memories other than shot memory, event memory, macro memory, and video memory (Still, Clip)
[SMEM]*
1
Register memory of shot memory (Max. 81)
[EMEM]*
2
Register memory of event memory (Max. 81)
[Macro]*
2
Register memory of macro memory (Max. 81)
[Still]*
2
4ch of current frame memory
[Clip]*
2
4ch of current frame memory
*1 The setting is xed with [ON] in the version below V2.00.00.
*2 The setting is xed with [OFF] in the version below V2.00.00.