Panasonic AV-HS6000 - Shot Memory Menu

– 37 –
Chapter 4 Preparations — Basic operations for the multi‑selection panel area
Shot memory menu
Press the <SHOT MEM> button on the multi-selection panel area to display the shot memory menu.
Register and play back the 81 register memories (9 pages×9 memories).
Pages 1 to 9 can be specied for the page numbers of the memories.
Numbers 1 to 9 can be specied as the respective memory numbers for the specied page numbers.
[TARGET SELECT] menu [PAGE SELECT] menuOperation menu for the register memory
r Operation menu for the register memory
Press the <SHOT MEM> button on the multi-selection panel area to display the operation menu for the register memory.
S1, S2 Status display eld of the [TARGET SELECT] menu Displays the items selected in the [TARGET SELECT] menu.
S3 [SEL] Moves to the [TARGET SELECT] menu.
1 ‑ 9 Register memory for operation target
Selects the register memory for the operation target. Page numbers, sub-numbers,
etc. are displayed in each item.
10
[RECALL/STORE/DEL] Switches the operation mode.
[STOP] Interrupts playback when awaiting or pausing playback in [RECALL] mode.
[PAUSE] Pauses playback during playback in [RECALL] mode.
11 [PAGE SEL] Moves to the [PAGE SELECT] menu.
12 [PLAY] Starts playback when awaiting or pausing playback in [RECALL] mode.
r [TARGET SELECT] menu
Select [SEL] in the operation menu of the register memory to display the [TARGET SELECT] menu.
S1 ‑ S3 [TARGET SELECT] Displays the menu title.
1 [ME1]
Selects the shot memory target.
In [STORE] mode, items where register memories are being selected are stored.
In [RECALL] mode, only the selected items will be played back among the items
stored in [STORE] mode.
f Playback is impossible when performing the following playback operations at other
operation areas.
When the same register memory page in the shot memory is being played back
When the same resource is being played back at the shot memory or event
memory
2 [ME2]
3 ―
4 ―
5 [XPT]
6 [DSK]
7 [AUX]
8 [CBGD]
9 ―
10 ― ―
11 [EXIT] Moves to the operation menu for the register memory.
12 ― ―
r [PAGE SELECT] menu
Select [PAGE SEL] in the operation menu of the register memory to display the [PAGE SELECT] menu.
S1 ‑ S3 [PAGE SELECT] Displays the menu title.
1 ‑ 9 [PAGE1] - [PAGE9] Selects the page number of the register memory.
10 ― ―
11 [EXIT] Moves to the operation menu for the register memory.
12 ― ―