Panasonic AV-HS6000 - Page 80

– 80 –
Chapter 5 Basic Operations — Memory
f The [Misc] screen is displayed.
[Protect]*
Select a le icon and set this item to [On] to protect the relevant le. The protected le is not deleted even when [Delete]
is selected.
[Rename]* Select [Rename] after selecting a le icon to change the le name using the on‑screen keyboard.
[Delete] Select [Delete] after selecting a le icon to delete the register memory. It cannot be deleted if [Protect] is set to [On].
[Copy From]*
Select the [Copy From] button after selecting the icon of an unregistered register memory, and then specify the register
memory to be the copy source using the on-screen numerical keypad.
Ex) To specify the ninth register memory on the ninth page, input [9.9].
[View] Fixed to icon display.
[Page] Switches pages.
[Close] Closes the [Misc] screen.
* This function will be available in V2.00.00 or higher.
Setting effect dissolve
Switching from the current image to the image or operation stored in the shot memory can be performed smoothly.
@@
NOTE
t This function will be available in V2.00.00 or higher.
1
Select the <MEM> button → [SHOT MEMORY] → [Register] tab.
2
Select an item in [Effect Dissolve] in the [Mode] column.
f Set the effect when switching images.
[On] Switches the images using the dissolve effect.
[Off] Switches the images using the cut effect.
3
Set the time for dissolve effect in [Dissolve Time] in the [Mode] column.
4
Select an item in [Hue Path] in the [Mode] column.
f Select the effect when switching colors. The following Hue becomes the target.
- Colors of the color background
- Colors of the borders
- Colors of the edges
- Colors of the ll matte
[CW] Changes the Hue clockwise on the vectorscope.
[Short] Changes the colors in the direction where the variation of Hue is small on the vectorscope.
[Long] Changes the colors in the direction where the variation of Hue is large on the vectorscope.
[CCW] Changes the Hue counterclockwise on the vectorscope.
[Step] Changes with the cut effect.
@@
NOTE
t When the [Effect Dissolve] in the [Mode] column is changed from [On] to [Off] while operations are being switched, the dissolve effect is canceled, and
the images are switched to the images of the selected shot memory instantaneously.
t During the operation switching, the operation of the fader lever is disabled.
t During the operation switching, other stored operations cannot be recalled.
Setting the operation of the multi‑selection panel area
To specify the operation when a register memory is selected, use the <SHOT MEM> button in the multi-selection panel area → [RECALL] mode.
f [Direct/Next] is not displayed in the version below V2.00.00, and the operation is xed to [Direct].
1
Select the <MEM> button → [SHOT MEMORY] → [Register] tab.
2
Select an item in [Direct/Next] in the [Select Panel] column.
[Direct] Plays back the image when the register memory is selected.
[Next] Plays back the image when the [PLAY] button is pressed after the register memory is selected.
Setting the details of the shot memory
The settings of [Register] can be specied in further detail.
The following gure shows the relationship between the settings of [Register] and the settings of [Detail Select].
f In the following gure, two types of lines show the types of items.
indicates an item to be selected in [Store]/[Recall] in the [Register] column.
indicates an item to be set in the [Detail Select] tab.