Operand WX WY WR WL SV EV DT LD I
Constant
Index
modifier
K H
S2 ● ● ● ● ● ● ● ● ● - - ●
n ● ● ● ● ● ● ● ● ● ● ● ●
D ● ● ● ● ● ● ● ● ● ● ● ●
■
Outline of operation
● Reads [n] words of the data stored in the area starting with [S2], and stores it in the
positioning memory area starting with [D].
● Channel numbers and the type of positioning memory are specified by [S1].
■
Precautions during programming
● If an operand is an out-of-range value, an operation error occurs.
● For details of positioning memory, refer to "11.3 Positioning Memory".
■
Flag operations
Name Description
R9007
R9008
(ER)
When the [S1] value is outside the set range
When the [D] value exceeds the positioning area specified by [S1]
When the range of the data written from [D] exceeds the positioning area specified by [S1]
When the no. of written data is "0"
When the written data exceeds the area of [S2]
7.1 Table Setting Mode Control Instruction
WUME-FPXHPOSG-01 7-9
To Next Page
Loading...
