Panasonic FP-XH Series

Introduction
Thank you for purchasing a Panasonic product. Before you use the product, please carefully
read through the user’s manual, and understand it in detail to use the product properly.
Type of Manual
● This manual describes the "positioning function (table setting mode) / PWM output and high-
speed counter function" implemented in the FP-XH Control Unit.
● The following user’s manuals are available for the FP-XH series. Please refer to a relevant
manual for the unit and purpose of your use.
● The manuals can be downloaded from our Download Center:https://
industrial.panasonic.com/ac/e/dl_center/.
Unit name or purpose of
use
Manual name Manual code
FP-XH Control Unit
FP-XH User‘s Manual (Basic) WUME-FPXHBASG
FP Series Programming Manual ARCT1F313E
Positioning Function /
PWM Output / High-speed
Counter Function
FP-XH User’s Manual
(Positioning / PWM Output / High-speed Counter)
WUME-FPXHPOSG
Communication Functions
FP-XH User‘s Manual (COM Communication) WUME-FPXHCOMG
FP-X Extension
(Communication) Cassette
FP-X Expansion Unit
FP-X Series User’s Manual WUME-FPX
FP-X Function Cassettes
SAFETY PRECAUTIONS
● To prevent accidents or personal injuries, please be sure to comply with the following items.
● Prior to installation, operation, maintenance and inspection, please read this manual carefully for proper use.
● Before using the product, please fully understand the knowledge related to the equipment, safety
precautions and all other precautions.
● Safety precautions are divided into two levels in this manual: Warning and Caution.
Incorrect operation may lead to death or serious injury.
● Take appropriate safety measures for the external circuit of the product to ensure the security of the whole
system in case of abnormalities caused by product failure or external factors.
● Do not use this product in areas with inflammable gases.
Otherwise it may lead to an explosion.
● Do not put this product into a fire.
Otherwise it may cause damage to the battery or other electronic parts.
● Do not impact, charge or heat the lithium battery, and do not put it into a fire.
Otherwise it may lead to fire or damage.
Incorrect operation may lead to injury or material loss.
● To prevent the excessive exothermic heat or smoke generation of the product, a certain margin is required
for guaranteed characteristics and performance ratings of relative products.
● Do not disassemble or modify the product.
Otherwise it may lead to the excessive exothermic heat or smoke generation of the product.
● Do not touch terminal blocks during power-on.
WUME-FPXHPOSG-01 iii