Panasonic FP-XH Series

8.2 What to Do If an Error Occurs
8.2.1 ERR / ALM LED Flashes
■
Situation
A syntax error or self-diagnostic error has occurred. The following shows the procedure when a
positioning error has occurred.
■
Solution
1. Check the error code using the programming tool.
If a PLC error occurs during programming or debugging, the "Status Display" dialog box will
appear automatically.
2. In the case of the positioning operation error, press the [Positioning errors] button.
The channel number where the positioning error has occurred and the error code occurred
when using the table setting mode appears.
Press the [Clear Error Log] button to clear the positioning error log.
3.
Press the [Close] button.
8.2 What to Do If an Error Occurs
8-4 WUME-FPXHPOSG-01