Panasonic FP-XH Series

8.2.5 Rotation/Movement Direction is Reversed
■
(Reverse direction) (Intended direction)
■
Solution 1
Check to make sure the servo amplifier and motor driver are connected to the unit correctly.
Point to check
Check to make sure the CW/CCW output or the Pulse/Sign output is connected to the pertinent
input of the servo amplifier and motor driver.
■
Solution 2
Change the pulse output rotation direction of the parameters for each axis, and set it to the
reverse direction.
8.2 What to Do If an Error Occurs
8-8 WUME-FPXHPOSG-01