Panasonic FP-XH Series

in the high-speed counter setting of the system register is switched between enable and
disable.
■
Allocation of control codes
● The following bits are allocated according to the specified channel and functions
● When controlling the above functions using external inputs, arbitrary inputs can be allocated.
■
Example of program
The following example shows the program for performing the software reset of the high-speed
counter CH0 using the input X7.
● For details of the allocations of I/O and flags, refer to “Allocation of Memory Areas”.
REFERENCE
11.2.4 When Using High-speed Counter Function
10.3.2 [F1 DMV] Elapsed Value Write / Read Instruction
Writes and reads the elapsed value of the high-speed counter.
10.3 High-speed Counter Instruction
10-12 WUME-FPXHPOSG-01