Panasonic FP-XH Series

(Note 1) When using the target value match ON instruction (F166) or target value match OFF instruction (F167)
in the high-speed counter function, arbitrary output is specified in the range of Y0 to Y29F in a user
program so that it does not overlap the above functions.
(Note 2) When using the PWM output, the output numbers to be paired are normal output.
■
Pulse I/O cassette input signal
I/O
No.
Pulse output function
High-speed counter function
Count input
Reset input
Single-phase 2-phase
X100
CH0 J-point control positioning
control start input
CH8 Count input
CH8 Count input
-
X101 - CH9 Count input -
X102 CH0 Home input - -
CH8 Reset input
or CH9 Reset input
X200
CH1 J-point control positioning
control start input
CHA Count input
CHA Count input
X201 - CHB Count input
X202 CH1 Home input - -
CHA Reset input
or CHB Reset input
■
Pulse I/O cassette output signal
I/O
No.
Pulse output function
PWM output function
Pulse output Deviation counter clear output
Y100 CH0 CW or pulse output - CH0 PWM output
Y101 CH0 CCW or sign output - -
Y102 -
CH0 Deviation counter clear
output
-
Y200 CH1 CW or pulse output - CH1 PWM output
Y201 CH1 CCW or sign output - -
Y202 -
CH1 Deviation counter clear
output
-
1.2.4 Restrictions on Using Together with Communication Function
● The FP-XH series can communicate with external devices through the maximum of five
communication interfaces including the COM0 port supported as standard and COM1 to
COM4 ports used by communication cassettes.
● When using all the five ports from COM0 to COM4, the communication speed is 115.2 kbps
max. and the pulse output function supports two axes max. When using four or less number
of ports, the communication speed is 230.4 kbps max. and the pulse output function supports
six axes max.
1.2 Restrictions on Combinations and Functions
WUME-FPXHPOSG-01 1-7