Offset
address
Name Default Description R W
-8,388,608 to +8,388,607
0008
Dwell
time
K0
Stores the setting of dwell time.
Setting range: 0 to 32,767ms
● ●
0009
Reserved for
system
- - - -
(Note 1) The offset addresses in the above table are for the table no. 0. They vary according to the table
numbers as described on the next page.
■
Offset addresses
Table no.
Control
code
Control
pattern
Positioning
acceleration
time
Positioning
deceleration
time
Positioning
target speed
Positioning
movement
amount
Dwell
time
1 0 1 2 3 4-5 6-7 8
2 10 11 12 13 14-15 16-17 18
3 20 21 22 23 24-25 26-27 28
4 30 31 32 33 34-35 36-37 38
5 40 41 42 43 44-45 46-47 48
6 50 51 52 53 54-55 56-57 58
7 60 61 62 63 64-65 66-67 68
8 70 71 72 73 74-75 76-77 78
9 80 81 82 83 84-85 86-87 88
10 90 91 92 93 94-95 96-97 98
11 100 101 102 103 104-105 106-107 108
12 110 111 112 113 114-115 116-117 118
13 120 121 122 123 124-125 126-127 128
14 130 131 132 133 134-135 136-137 138
15 140 141 142 143 144-145 146-147 148
16 150 151 152 153 154-155 156-157 158
17 160 161 162 163 164-165 166-167 168
18 170 171 172 173 174-175 176-177 178
19 180 181 182 183 184-185 186-187 188
20 190 191 192 193 194-195 196-197 198
(Note 1) For the positioning target speed and positioning movement amount, specify the lower address number
of 2-word area.
11.3 Positioning Memory
11-18 WUME-FPXHPOSG-01
To Next Page
Loading...
