Parameter
name
No. and setting item
Settings
(Y200 and Y201) Pulse output [FP-X compatible instruction mode]
(Note 1) Displayed items vary according to models.
(Note 2) Select "Normal input" and "Normal output" for the input and output that is not used for the pulse
output function or high-speed counter function.
(Note 3) "J-point positioning start input" for each channel can be selected only when Table setting mode is
set in the system register no. 407.
4.3 System Register Settings
WUME-FPXHPOSG-01 4-19
To Next Page
Loading...
