Panasonic KX-NS500 - Page 213

Setting parameters assigned to Remote SIP-MLT—NAT - SIP Register Expire
Time (s)
Specifies the length of time that will elapse before the current registration expires.
Note
This setting is available only when NAT - Keep Alive Packet Type is set to "Register".
Value Range
10–3600 s
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2.3 Simple Remote Connection
Setting parameters for Networking Survivability, assigned to Remote
SIP-MLT—NAT - CWMP Server IP Address
Specifies the outside-facing IP address or host name of the PBX-side network gateway for remote connections
that is used when the gateway specified in Setting parameters assigned to Remote SIP-MLT is not available.
Value Range
1.0.0.0–223.255.255.255 (IP address), Max. 100 characters (host name)
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2.3 Simple Remote Connection
Setting parameters for Networking Survivability, assigned to Remote
SIP-MLT—NAT - CWMP Server (HTTP) Port No.
Specifies the outside-facing HTTP port of the PBX-side network gateway for remote connections that is used
when the gateway specified in Setting parameters assigned to Remote SIP-MLT is not available.
Value Range
1–65535
Maintenance Console Location
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Feature Guide References
5.2.2.3 Simple Remote Connection
PC Programming Manual 213
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site