12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 3— Executive
Override Deny
Feature Guide References
2.10.2 Executive Busy Override
Alternate Calling - Ring / Voice
Specifies the feature number used to allow a caller to change the called extension’s preset call receiving
method to ring tone or voice.
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
Feature Guide References
2.5.3 Intercom Call
Message Waiting Set
Specifies the feature number used to leave a Message Waiting notification.
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
Feature Guide References
2.20.1 Message Waiting
Call Monitor
Specifies the feature number used to listen to a busy extension’s conversation.
Value Range
1 digit (0–9, *, or #)
Maintenance Console Location
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Executive— Call Monitor
PC Programming Manual 491
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
To Next Page
Loading...
