Minimum Caller ID Digits (for National)
Specifies the minimum number of digits required in the caller’s number for it to be recognised as a national
call. The value specified here must be smaller than Minimum Caller ID Digits (for International).
Value Range
0–30
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Guide References
2.19.1 Caller ID
Added Number (for International)
Specifies the number to be added to the incoming telephone number when the total number of digits exceeds
Minimum Caller ID Digits (for International).
Value Range
Max. 8 digits (0–9, *, and #)
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Guide References
2.19.1 Caller ID
Added Number (for National)
Specifies the number to be added to the incoming telephone number when the total number of digits exceeds
Minimum Caller ID Digits (for National) but does not exceed Minimum Caller ID Digits (for
International).
Value Range
Max. 8 digits (0–9, *, and #)
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Guide References
2.19.1 Caller ID
PC Programming Manual 565
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification