Panasonic KX-NS500 - Page 685

PC Programming Manual References
9.34 PBX Configuration—[1-2] Configuration—Portable Station— Extension No.
Extension Name
Specifies the name of the PS.
Value Range
Max. 20 characters
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
9.34 PBX Configuration—[1-2] Configuration—Portable Station—
Extension Name
CLIP ID
Specifies the CLIP number sent to the public network to show on the called party’s telephone display when
making a trunk call.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
CLIP on Extension/CO
Selects the CLIP number to show on the called party’s telephone.
Value Range
Extension: Show the CLIP number specified in CLIP ID.
CO: Show the CLIP number specified in Subscriber Number in 9.26 PBX Configuration—[1-1]
Configuration—Slot—Port Property - PRI Port.
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting— Subscriber
Number
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—CLIP— CLIP ID
PC Programming Manual 685
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings