Manual C. Waiting for Extension Call
Selects the method of receiving call waiting notification from other extensions.
Value Range
Off: No notification
BSS: Tone from the handset or built-in speaker
OHCA: If selected, a BSS notification will be received.
W-OHCA: If selected, a BSS notification will be received.
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Feature Guide References
2.1.3.3 Call Waiting
Automatic C. Waiting
Specifies whether to receive call waiting notification for a call from trunk, a doorphone call or a call via an
incoming call distribution group.
Value Range
Off, On
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Feature Guide References
2.1.3.3 Call Waiting
Pickup Dial Set
Sets or cancels the Hot Line feature. The number specified in
Pickup Dial No. on this screen is dialled
automatically after going off-hook when the Hot Line feature is active.
Value Range
Off, On
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Hot Line
(Pickup Dial) Start (s)
690 PC Programming Manual
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
To Next Page
Loading...
