ISDN Bearer
Selects the ISDN bearer mode. When Automatic is selected, the bearer mode is set automatically depending
on the type of the PS.
Value Range
Automatic, Speech, Audio
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Option 8
Extension Number
Indicates the extension number of the PS (reference only).
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
9.34 PBX Configuration—[1-2] Configuration—Portable Station— Extension No.
Extension Name
Specifies the name of the PS.
Value Range
Max. 20 characters
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
9.34 PBX Configuration—[1-2] Configuration—Portable Station— Extension Name
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the
moment that the extension goes on-hook for the previous call.
700 PC Programming Manual
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
To Next Page
Loading...
