Panasonic KX-NS500 - Page 701

Value Range
Disable, Enable
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
Wrap-up Timer
Specifies the length of time that must pass after completing a call before a PS will accept another call when
logged in as a member of an Incoming Call Distribution Group.
This timer is used when " Options—Wrap-up Timer based on" is set to "Extension" in 11.5.3 PBX
Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous.
Value Range
0–3000 s
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List— Wrap-up Timer
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—
Options—Wrap-up Timer based on
Feature Guide References
2.2.2.7 Log-in/Log-out
Option 9
Extension Number
Indicates the extension number of the PS (reference only).
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
PC Programming Manual References
9.34 PBX Configuration—[1-2] Configuration—Portable Station— Extension No.
PC Programming Manual 701
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings