Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
No DTMF Input Operation
No DTMF Input Call Coverage for Day, Night, Lunch, and Break (Selection)
Specifies where a caller will be transferred when there is no DTMF input in response to system guidance (for
example, the caller is using a rotary phone) for each time mode.
Value Range
G.D.M.: The caller is transferred to the General Delivery Mailbox.
Operator: The caller is transferred to an operator.
Mailbox: The caller is transferred to the designated mailbox extension.
Extension: The caller is transferred to the designated extension.
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.32 No DTMF Input Operation
No DTMF Input Call Coverage for Day, Night, Lunch, and Break (Parameter)
Specifies the transfer destination if "Mailbox" or "Extension" is selected for No DTMF Input Call Coverage
for Day, Night, Lunch, and Break (Selection).
Value Range
2–8 digits (for extensions)
2–[the value set in Mailbox No. Max. Length (3-8)] digits (for mailboxes)
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.32 No DTMF Input Operation
Name Entry
Number of Digits to Entry Name (3-4 digits)
Specifies the number of digits (letters) that must be entered when using the Dial by Name feature, which allows
callers to connect themselves with the desired party by entering the first 3 or 4 letters of the party’s name.
PC Programming Manual 919
23.2 UM Configuration—[4-2] Service Settings—Parameters
To Next Page
Loading...
