Deleting an Alternate Extension
1. Select the desired alternate extension.
2. Click Delete.
3. Click Yes.
Changing the order of Alternate Extensions
Select an extension and click Move up or Move down to change its order in the list. Alternate extensions will
be dialled in order from top to bottom.
Note
Extension Groups and Logical Extensions cannot be assigned.
Value Range
Max. 32 extensions (max. 5 digits per extension)
PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—
PBX Environment—Alternate Extension
Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;])
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
List All Names
If set to "Enable", callers can listen to all subscriber names and extension numbers in the Automated
Attendant service or Custom Service.
Value Range
Enable, Disable
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Operator Transfer Mode
Specifies the timing of the operator transfer.
Value Range
Transfer immediately, Do not transfer immediately
918 PC Programming Manual
23.2 UM Configuration—[4-2] Service Settings—Parameters
To Next Page
Loading...
