Panasonic KX-NS500 - Page 955

PC Programming Manual References
12.1 PBX Configuration—[4-1] Extension—Wired Extension— FWD No Answer Time
12.2 PBX Configuration—[4-2] Extension—Portable Station— FWD No Answer Time
Dialling Parameters—Outgoing Call No Answer Time (10-90 s)
Specifies the length of time that the system waits before concluding that there is no answer at the outside
number called.
Value Range
10–90 s
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Pause Time for "," (100-9900 ms, *100 ms)
Specifies the pause time for "," used in call sequences.
Value Range
100–9900 ms, in units of 100 ms
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Dialling Parameters—Pause Time for ";" (100-9900 ms, *100 ms)
Specifies the pause time for ";" used in call sequences.
Value Range
100–9900 ms, in units of 100 ms
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Message Waiting Notification—System Callback No. (Up to 32 digits)
Specifies a callback number to be displayed with text reports of messages waiting notifications. The system
callback number is displayed when the caller does not enter his or her telephone number when prompted by
the system.
Value Range
Max. 32 digits
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual 955
24.4 UM Configuration—[5-4] System Parameters—Parameters