4.11 Option Programming
System Additional Information (contd.)
990
System Programming 4-141
ReferencesDefaultSelectionDescriptionField
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
A CO line set to pulse or call blocking mode
in program [402] “Dial Mode Selection” can
have two settings. This assigns the pulse
break ratio during dial pulsing. Select an
appropriate ratio depending on the standard
in your country.
Assigns if an extension’s mailbox number is
substituted by the extension number or it is
programmable (free). If a call is forwarded
or rerouted to the VPS, this system
automatically transmits the mailbox number
to the VPS to specify the user’s mailbox. To
make it programmable, select “1 (free),”
then assign the number in program [609]
“Voice Mail Access Codes.”
Assigns the first display of a digital large
display digital proprietary telephone (KX-
T7235) in Station Speed Dialing.
Assigns the source of Music Source 1 for
Music on Hold and BGM.
Selects inter-digit pause for pulse dialing.
Selects intercom dial tone frequency.
This field is provided to assign PAD Switch
Control (volume control of received calls on a
CO line). This can be assigned per CO line.
The CO numbers [1] through [8] correspond to
CO lines 1 through 8 for KX-TD816, and CO
numbers [1] through [24] correspond to CO
lines 1 through 24 for KX-TD1232 respectively.
Prevents or allows a call originated by an AA
port of VPS to another AA port.
Prevents or allows sending pulse dialing signals
during an outside call.
0 : 60 %
1 : 67 %
0 : extension
number
1 : free
0 : names
1 : numbers
0 : internal music
source
1 : external music
source
00 : 630 ms
01 : 830 ms
10 : 1030 ms
0 : normal
1 : distinctive
0 : 0 dB
1 : -3 dB
0 : prevent
1 : allow
0 : prevent
1 : allow
1
0
0
1
01
0
0
1
0
Dial Type
Selection
Voice Mail
Integration
Special Display
Features for KX-
T7235 — Station
Speed Dialing
• Background
Music (BGM)
• Background
Music (BGM)
– External
• Music on Hold
None
None
None
Voice Mail
Integration
None
To Next Page
Loading...
