[322]–[329] ARS Routing Plans 1 through 8
[330] ARS Modify Removed Digit
[331] ARS Modify Added Number
CO Line Programming
[400] CO Line Connection Assignment
[401] CO Line Group Assignment
[402] Dial Mode Selection
[403] Pulse Speed Selection
[404] DTMF Time
[405] CPC Signal Detection Incoming Set
[407]–[408] DIL 1:1 Extension—Day/Night
[409]–[410] Intercept Extension—Day/Night
[411] Host PBX Access Codes
[412] Pause Time
[413] Register Recall Signal Time
[414] Disconnect Time
[415] CPC Signal Detection Outgoing Set
[416] ISDN Line Number Assignment
[417] ISDN Outgoing CLIR Service
Assignment
[418] ISDN DDI Service Assignment
[419] CO Line Name Assignment
[420] Reverse Circuit Assignment
[430] DID Table Number Assignment
[431] DID Incoming Assignment
[432] DID Outgoing Assignment
[433] DID Subscriber Number Removed
Digit and Received Digit
[434] DID Added Number
[435] DID Wink Time Assignment
[436]* Pay Tone Assignment
COS Programming
[500]–[501] Toll Restriction Level—Day/
Night
5.2 Default Values
5-6 List
Address Program Default
Not Stored
All Modification Tables=0 (digits)
Not Stored
All CO Lines=Connect
CO01=TRG 1; CO02=TRG 2;
CO03=TRG 3; CO04=TRG 4;
CO05=TRG 5; CO06=TRG 6;
CO07=TRG 7; (KX-TD816) CO08=TRG 8;
(KX-TD1232)
CO08 through CO24=TRG8
All CO Lines=DTMF
All CO Lines=10 pps
All CO Lines=80 ms
All CO Lines=352 ms
All CO Lines=Disable—Day/Night
All CO Line Groups=Disable—Day/Night
Not Stored
All CO Line Groups=1.5 s
All CO Line Groups=96 ms
All CO Line Groups=2.0 s
Disable
All CO Lines — Not Stored
All CO Lines — Enable
All CO Lines — Disable
All CO Lines — Not Stored
All CO Lines — Regular
All CO Line Groups — Not Stored
All DID Tables — Wink
All DID Tables — Wink
All DID Tables — RMV:0
DID Table 1 — RCV:1, Other DID Tables —
RCV:3
All DID Tables — Not Stored
All DID Tables — 16
All CO Lines — Disable
All COS=Level 1—Day/Night
*: Available for KX-TD1232 only.
To Next Page
Loading...
