Panasonic KX-T30865 - Page 370

5.2 Default Values
Address Program Default
All COS=Disable
All COS=Enable
All COS=Disable
All COS=Disable
All COS=Option
All Jacks=Disable
All Jacks-1/2=COS 1
All Jacks-1/2=Extension Group 1
All Jacks-1/2=All CO Lines=Immediate
Ringing—Day/Night
All Jacks-1/2=All CO Lines=Enable—Day/
Night
Jack 01-1= All Doorphones; Other Jacks=No
Doorphone—Day/Night
Not Stored
Not Stored
Outgoing Calls=All; Incoming Calls=On
Page Length=66; Skip Perforation=0
Not Applicable
Hold and BGM=Music 1
All External Pagers=Disable
On
New Line Code=CR+LF; Baud Rate=9600;
Word Length=8; Parity Bit=Mark; Stop Bit=1
— Port1/Port2
• KX-TD816: Pager 1=296; DTA=299
• KX-TD1232: Pager 1=296; Pager 2=297;
Pager 3=396; Pager 4=397; MODEM=399;
DTA=299
CCITT
Not Applicable
Not Applicable
See pages 4-139 through 4-142.
See page 4-143.
*: Available for KX-TD1232 only. List 5-7
[502] Extension-to-CO Line Call Duration
Limit
[503] Call Transfer to CO Line
[504] Call Forwarding to CO Line
[507] Do Not Disturb Override
[508] Account Code Entry Mode
Extension Programming
[600] EXtra Device Port
[601] Class of Service
[602] Extension Group Assignment
[603]–[604] DIL 1:N Extension and Delayed
Ringing—Day/Night
[605]–[606] Outgoing Permitted CO Line
Assignment—Day/Night
[607]–[608] Doorphone Ringing Assignment
—Day/Night
[609] Voice Mail Access Codes
[610] ISDN DDI Number / Extension
Number Transformation
Resource Programming
[800] SMDR Incoming / Outgoing Call
Log Printout
[801] SMDR Format
[802] System Data Printout
[803] Music Source Use
[804] External Pager BGM
[805] External Pager Confirmation Tone
[806]–[807] EIA (RS-232C) Parameters—
Port 1/ Port 2
[813] Floating Number Assignment
[814]* Modem Standard
[815] System Working Report Printout
[816] System Working Report Clear
Option Programming
[990] System Additional Information
[991] COS Additional Information