17-00001-C Page | 12
Illistration of safety notes
Safety notes are identified by a pictogram and a signal word. The signal word describes the
severity of the risk at hand.
Warning possible dangerous situation that could cause minor physical
injuries.
Risk of electrical voltage possible dangerous situation that could
cause serious physical injuries.
Risk of crush injuries possible dangerous situation that could cause
serious physical injuries.
Risk of pinching injuries possible dangerous situation that could cause
serious physical injuries.
Important for a special behaviour or activity for the safe handling of
the machinery.
Application tips and particularly useful information.
Stop! Contact your Haeger Representative for instructions on how to
proceed.
Eye protection must be worn when operating this machine
Read First! Read instructions first before operating this machine.
Make sure that you read and understand all of the descriptions,
instructions and notes contained in this section. Follow all of the
Warnings and Cautions in this manual. Your safety and
productivity
depend on
it.
The Haeger 824 WindowTouch was designed to conform to applicable
ANSI, OSHA, and CSA safety standards. It is the user’s responsibility to
understand any specific local safety codes that may require additional
guarding and conform to those standards.
To Next Page
Loading...