17-00001-C Page | 15
SECTION 2 - INSTALLATION
Handling
The Haeger Hardware Insertion Machine is designed to provide the operator with a comfortable
working height and to allow freedom of movement when positioning work pieces in the tooling
area. Because of these features, the machine is top heavy when unloading.
➢ Handle with extreme caution!
➢ Never attempt to move the machine with a forklift
positioned in front of or on either side of the machine.
➢ Always position the forklift or pallet truck to the rear of
the machine when moving the machine with a forklift or
pallet truck.
NEVER lift machine from
the FRONT or the SIDE – IN
OR OUT OF THE BOX.
ALWAYS Position the
forklift to REAR of the machine.
Machine is HEAVY in the REAR
and will tilt back when lifted
with lift strap.
To Next Page
Loading...