17-00001-C Page | 124
Weekly Care & Maintenance
This maintenance schedule is applicable for standard machine shop operating conditions. When
operating in severe conditions such as heavy dust or dirt or 24 hour running. Increase the schedule to
reflect such conditions.
(MAS 350): Care & Maintenance
DO NOT use rubbing alcohol, WD-40, diesel, gas, etc., to clean MAS 350 composite bowls!
• Dirt, grease, debris builds
up over time in the bowl.
• To avoid getting debris
in the bowl, lift, rather
than pour, the hardware
into the bowl
• 1
st
: Remove all fasteners
from bowl.
• 2
nd
: Use dry compressed air to
blow out debris.
• Eye protection must
be worn.
• 3
rd
: Wipe bowl clean with dry
cloth.
• If dirt, grease is present,
use with
gloves and a clean cloth to
wipe off build up.
• Read all warnings on
cleaning solution container
& follow recommendations
for safe handling and
storage.
To Next Page
Loading...