PennEngineering Haeger 824 WindowTouch-4e - Upper Tool Changer: Care & Maintenance

17-00001-C Page | 126
Upper Tool Changer: Care & Maintenance
• It is recommended to
blow out the upper tool
changer weekly or more
frequently based on
usage.
• DO NOT use rubbing alcohol, WD-40, diesel, gas, etc., to clean tool changer slides!
• DO NOT use Silicone Spray as a lubricant on this machine.
• 2
nd
: Use dry compressed air to
blow out debris.
• Eye protection must
be worn.