17-00001-C Page | 44
Safety Awareness (Residual Safety Risks, continued)
Operator Safety Awareness & Residual Risks
1.
2.
Risk of crushing: A high risk
crushing hazard is created by the Upper
Tool and Lower Tooling.
Safety of the operator in non-
conductive access operation must remain
accessible only to trained and authorized
personnel that are experienced in
appropriate machinery operating conduct.
When operating this machine
while wearing any metal objects (i.e.,
rings, watches, bracelets, etc.) that may
come into contact with the Upper Tool,
Lower Tool or work piece.
To Next Page
Loading...