➢ Read and understand all Warnings and Cautions in this manual and follow the instructions for testing the
Safety System in the Safety System section before attempting to operate this machine
➢ NEVER wear
anything metallic
that may come into contact
with
the Upper Tool, Lower Tool
or
work piece
(watches,
rings,
bracelets,
etc.).
➢ Never leave your foot on
or
above the Down foot
switch
after you have
completed
a cycle of the
machine.
Remove
it from the Down foot
switch.
Keep your feet away from
the
Down foot switch
until
your
hands are clear of the
tooling
area and you intend to lower
or
raise the Upper Tool
Holder
or
insert
hardware.
➢ NEVER Operate this Machine without wearing the proper eye protection!
Conductive Mode:
• Turn key to the Right.
• Key is removable in this
position and should not stay with
the machine – key should be kept
by a trained setup person or shop
owner.
To Next Page
Loading...