EasyManuals Logo

Pentax Q10 User Manual

Pentax Q10
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
108
Shooting Functions
4
4
Press the shutter release button fully.
Movie recording starts.
A red P displayed at the top right of the screen blinks during movie
recording.
The following operations can be performed while recording a movie.
Available operations
5
Press the shutter release button again.
Movie recording stops.
4 button Performs autofocus.
d/i button
Locks the exposure (when [AE Lock] is assigned to the
d/i button in [Green Button] of the [A Rec. Mode 3]
menu ).
Performs autofocus (when [Enable AF] is assigned to
the d/i button in [Green Button] of the [A Rec. Mode
3] menu ).
When [Sound] is set to g (On), the camera operation sounds are also
recorded. When recording a movie, mount the camera onto a tripod and do
not operate the camera while recording.
The flash is not available.
When recording a movie using any image processing function, such as
Digital Filter, some frames may be omitted from the recorded movie file.
If the internal temperature of the camera becomes high during movie
recording, the recording may be terminated to protect the camera circuitry.
When recording a movie, regardless of the focus method setting, recording
starts when the shutter release button is pressed fully even if the subject is
not in focus.
You can record a movie continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
The screen display in C mode is set according to the [LCD View Options]
setting made in the [A Rec. Mode 3] menu. (p.185) However, the histogram
and Bright/Dark Area warning are not displayed during movie recording.
If you intend to record movies continuously for a long period, use of the AC
adapter kit (optional) is recommended. (p.40)
You can also use an optional remote control unit to start recording a movie.
(p.96) Press the four-way controller (5) in C mode to display the screen for
selecting on/off for the use of the remote control, instead of the normal Drive
Mode setting screen. (To stop recording, press the shutter release button of
the camera.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax Q10 and is the answer not in the manual?

Pentax Q10 Specifications

General IconGeneral
BrandPentax
ModelQ10
CategoryDigital Camera
LanguageEnglish

Related product manuals