42
Getting Started
2
Inserting/Removing an SD Memory
Card
This camera uses a commercially available SD Memory Card, SDHC
Memory Card, or SDXC Memory Card.
Make sure the camera is turned off before inserting or removing the SD
Memory Card.
1
Make sure that the camera is turned off.
2
Slide the card cover in the
direction of the arrow, and then
lift it to open (1→2).
3
Insert the card all the way with
the SD Memory Card label facing
toward the monitor.
• Do not remove the SD Memory Card while the card access lamp is lit.
• If the card cover is opened while the power is on, the camera will turn off. Do
not open the cover while the camera is in use.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other devices. Refer to “Formatting an SD Memory Card”
(p.193) for details on formatting.
• Use a high-speed memory card when recording movies. If a write speed
cannot keep up with a recording speed, the writing may stop during
recording.
2
1
To Next Page
Loading...
Need help?
General
