90
Shooting Functions
4
Manually adjust the focus.
1
Set [Focus Method] to \.
Refer to “Setting the Focus Method” (p.84) for details.
2
While viewing the monitor, turn
the focusing ring.
The shutter can be released by pressing
the shutter release button fully even if the
subject is not in focus.
You can more easily focus on the subject by enlarging the image in the
center of the monitor during \ mode.
1
Select [Focus Settings] in the [A Rec. Mode 1] menu, and
press the four-way controller (5).
The [Focus Settings] screen appears.
2
Use the four-way controller (23) to select [MF Assist],
and press the four-way controller (5).
• Turning the zoom ring with the focus locked may cause the subject to be out
of focus.
• You cannot lock the focus when the capture mode is set to \ (Moving Object)/
l (Night Snap)/Z (Pet)/R (Kids)/n (Stage Lighting) of H (Scene) mode.
In such cases, the autofocus continues to focus on the subject until the shutter
is released (Continuous Autofocus).
Adjusting the Focus Manually (Manual Focus)
Focusing with the Image Enlarged
To Next Page
Loading...
Need help?
General
