133
Shooting Settings
5
4
Use the four-way controller (45) to select the desired
setting.
To make detailed settings for Smart Effect, press the mc button.
5
Repeat Steps 3 and 4.
Save the settings to the other positions in the same way.
6
Press the 4 button.
The setting assigned to each position is saved.
7
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
You can take pictures with the settings saved in the quick dial, and while
using the quick dial, these settings have priority over the settings such as
ones made through the menus.
1
In Capture mode, turn the quick
dial to select the position 1 to 4.
The setting saved in the selected position
is loaded, and the camera is ready to take
a picture.
2
Take a picture.
3
After taking pictures, return the quick dial to the position
0.
The camera returns to the original setting.
Loading Settings for Taking Pictures
You cannot use the menus to change the settings when taking pictures with the
quick dial. To change the settings of the quick dial, save other settings again.
To Next Page
Loading...
