191
Changing Additional Settings
8
Settings for the items of the [A Custom Setting] menu can be reset to
default values.
1
Select [Reset Custom Functions] in the [A Custom Setting
2] menu, and press the four-way controller (5).
The [Reset Custom Functions] screen appears.
2
Press the four-way controller (2) to select [Reset], and
press the 4 button.
The settings are reset, and the screen that was displayed before
selecting the menu appears again.
You can check the version information for software (firmware) in the
camera. If an update file for the firmware is released, you can update the
camera to the latest firmware version.
1
Select [Firmware Version Info] in the [R Set-up 3] menu,
and press the four-way controller (5).
The firmware versions for the camera and
lens are displayed on the [Firmware
Version Info] screen.
If an update file is saved on your SD
Memory Card, you can run the update at
a later time.
2
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Resetting the Custom Setting Menu
Checking the Camera Version Information
Refer to the PENTAX website for more information and procedural details
regarding updates.
To Next Page
Loading...
Need help?
General
