176
Editing Images
7
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 3 on p.174,
and press the 4 button.
The multi-image display screen appears.
Refer to p.150 for details on operations in the multi-image display screen.
2
Use the four-way controller (2345) to select the RAW
images to be developed, and press the 4 button.
3
Press the mc button.
The development confirmation screen appears.
4
Use the four-way controller (
23
)
to select [Develop images as shot]
or [Develop images with modified
settings], and press the
4
button.
To change parameters, select [Develop
images with modified settings].
5
Use the four-way controller
(2345) to set [JPEG Recorded
Pixels] and [JPEG Quality].
When [Develop images with modified
settings] is selected in Step 4, refer to
p.175 to change other parameters.
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as], and
press the 4 button.
The selected RAW images are developed and saved as new images.
Developing Multiple RAW Images
MENU